Cambria Hotel — White Plains, New York — Hotel

The Situation

The Cambria Hotel in downtown White Plains is conditioned by three Daikin rooftop units on the eighth-floor roof: a 50-ton unit serving the lobby and public spaces and two 25-ton makeup air units, all installed in 2013. When we were called in, the 50-ton unit had no display, the controls network had degraded, and key temperature sensors had been removed by a previous contractor, leaving the lobby warm and the equipment running blind.

What We Did

  • Surveyed all three rooftop units and the controls network and issued a written HVAC deficiency report
  • Replaced the failed communication wiring with new shielded, plenum-rated, UV-resistant cable daisy-chained across all three units
  • Relocated the Daikin controller and replaced the MicroTech III control board on the 50-ton unit
  • Corrected the refrigerant charge and verified full cooling, economizer and damper operation
  • Replaced failed return-air, outdoor-air, discharge-air and leaving-temperature sensors on the rooftop units
  • Reset an emergency-stop lockout and tuned the heating controls for the season

Results

The 50-ton unit was returned to service with 100 percent cooling verified at a 58°F discharge and a 74°F space, and the lobby recovered. A 25-ton unit was brought back after sensor replacement, and the heating side was brought back online in the fall after a lockout reset, a new leaving-temperature sensor and control adjustments. The hotel now has a documented, prioritized list for the remaining controls restoration.

Project Details

  • Owner: Cambria Hotel White Plains
  • Location: Downtown White Plains, NY
  • Building: Full-service hotel
  • Systems: Three Daikin rooftop units (50, 25 and 25 tons), MicroTech III controls, R-410A, natural gas
  • Service: Controls rescue, communication wiring, sensors, refrigerant
  • Timeline: April – November 2026
The Cambria Hotel, downtown White Plains
The Cambria Hotel, downtown White Plains

Have a VRF system other contractors can’t fix?

Mountain Mechanical diagnoses and repairs Daikin, Mitsubishi, LG, Samsung and Fujitsu VRF systems across NYC, Long Island and Westchester. See how our VRF repair and rescue service works, or call 833-504-4822.

← All case studies

Need a technician? Mountain Mechanical provides VRF repair and rescue service for systems other contractors haven’t been able to fix, across NYC, Long Island and Westchester. Call 833-504-4822.